Savannah Hilton Head Int’l Airport
OHMEGA provided electrical engineering design services for the construction of one 160,000 square feet of commercial air cargo facility (FedEx) and one 60,000 square feet multi-tenant air cargo facility.
OHMEGA provided electrical engineering design services for the construction of a new Airfield Lighting Vault to support the construction of a new terminal building. The new vault may be a stand-alone facility near the new terminal or may be incorporated into the envelope of the new terminal building.
OHMEGA provided electrical engineering design services as required for the expansion of the airport’s existing TSA Security Checkpoint. The Client will provide all CAD background drawings and access to the facility as required to complete the scope.
OHEMGA provides electrical engineering design and bidding services as required for the rehabilitation of the airport’s 10,083’ long by 150’ wide runway. The electrical design scope consists of the following tasks: Replacement of Runway lights included: Runway High-Intensity Edge Lights...
OHMEGA provided electrical engineering design services for the upgrade of the critical power distribution system (CPDS) at the Miami International Airport (MIA) Air Traffic Control Tower (ATCT).
OHMEGA provided electrical engineering design services for the rehabilitation of apron lighting at Philadelphia International Airport. The project included the replacement of existing high pressure sodium (HPS) Lumineers with new state of the art, energy efficient LED Lumineers.
OHMEGA provided engineering consulting, design and construction phase services for the rehabilitation of airfield lighting systems at Charleston Executive Airport. The design included lighting systems for two runways, taxiways, new airfield lighting vault, new rotating beacon, and new primary and supplementary wind cones
OHMEGA assisted the Greater Orlando Aviation Authority in creating an Airfield Lighting Management System that will generate a condition assessment of the GOAA-owned and maintained airfield lighting system at the Orlando International Airport.
OHMEGA provided low voltage communications engineering design and construction phase services for the construction of approximately 10,000 square feet of aviation terminal space plus (6) 30,000 SF hangars with attached offices, (1) 60,000 SF hangar with attached offices, (1) 3,600 SF GSE shop, fuel farm and ramp. The project consisted of the construction of a new terminal facility and multiple hangar facilities for Signature Flight Support at San Jose International Airport in San Jose, California.
Air Cargo Facility Improvements at Savannah Hilton Head Int’l Airport (SAV)
OHMEGA provided electrical engineering design services for the construction of one 160,000 square feet
of commercial air cargo facility (FedEx) and one 60,000 square feet multi-tenant air cargo facility. Initial Site Investigation, project Kick-off and Review Meetings, site Lighting design included: High Mast Aircraft Parking Lighting, Parking Lot Lighting and Photometric calculations based on the requirements of IBC, County and the Illuminating Engineering Society of North America (IESNA.) Lighting controls for energy-efficient use of lighting.
Power distribution system included: Utility Service entrance and coordination, Electrical circuiting, risers and panel schedules for Site Lighting and Electrical load calculations. Voice & Data communications infrastructure (Telecom spaces, grounding, cabling, pathways & outlets). Electronic Security Systems – CCTV/ACS/IDS Design. CATV System pathway infrastructure, 2” conduit w/pull string to utility corridor; F-Connectors outlets, coaxial cabling and amplifiers to Main Telecom Room. Code Compliance with: National Electric Code (NFPA 70), latest version, International Building Code (IBC), latest version, County Building Department, National Fire Alarm Code (NFPA 72), latest version, Technical Specifications, Professional Engineer Sign & Seal of permit documents, Construction Administration Services, which included:
Response to contractor RFIs, six (6) construction site visits, shop drawing review, final inspection & punch list and record drawings.